Posted on

how to make weed bud

Your plants are happy in an organic soil or they are being fed nutrients designed for the vegetative phase. Lots of fan-forced breezes keep temperatures under control and strengthen your young plants. Exotic disciplines can be used like adding carbon dioxide to the environment. Low-stress training and scrogging can be used to increase the growth rate and flower potential of indoor cannabis.

Indoors water becomes the medium that carries nutrients. Unmodified water is used to flush hydroponic and soilless systems regularly. The pH of your water is very important. The canny cannabis grower has a good pH meter as part of a comprehensive grow kit.

HPS (High-Pressure Sodium) and MH (Metal Halide) lamps are traditional types of grow lights. A 1000W HPS with reflectors can efficiently light a 1.5 x 1.5-meter space and provide excellent growth. Similarly, a 600W MH lamp will light the same sized space and give you world class flowers at the end of the grow cycle. The heat factor generated by these lights must be considered. If not exhausted efficiently your grow space will quickly become too hot for healthy cannabis growth.

How Long Does The Vegetation Phase Last?

Outdoors you need to pick your time. Know your particular climate well. Have a sun cycle app or chart to make sure you get your timing right. Too early and you risk your plants going into flower immediately, then re-vegging when the daylight increases. This is unwanted. Your flowers will not form properly when blooming begins. Too late and you will have small plants with fewer flower sites.

Beginning your whole cannabis grow adventure is the germination of your seeds. Each viable seed contains all the information needed to grow the strain of plant you have chosen. All they need are the right conditions and the life cycle will begin. Seeds won’t germinate until three specific needs are met. Water, correct temperature (warmth) and a good location.

GROWING MEDIUM: Organic growers will use some kinds of soil every time inside or out. However, soil isn’t the only choice. Neutral mediums that are entirely nutrient dependant include coconut coir, perlite, vermiculite or rock wool. Aeroponics, purely hydroponic or deep water culture do not use mediums at all. The suspended root matrix gets nutrients directly from the nutrient mix.

With hydroponics or neutral mediums you supply all of the plant’s lifeblood with pre-formulated nutrient blends. Usually customised for marijuana especially. Specialised concoctions are made exclusively for whichever soil-less medium you choose.

It is evident that flower or bud is the utmost persuasive part of the plant, fan leaves also have a minute portion of THC and CBD. The Asians extract cannabis oil from the leaves for years. Recently, the growers are more selective and would not respect any part of the Cannabis plant other than flower/bud. Whatever the ingredients are, the best smoking quality comes from flowers or buds.

Before going into details about how to prepare weed to smoke, it is more important to know how to make weed from the plant. Growing weed is not rocket science and any hobbyist could grow it successfully from seed. The weed typically needs 25 weeks to reach maturity if you grow it from the seeds. As the Seeds take 4-7 days to sprout depending on your potting material, type of variety, and growing conditions like temperature and humidity.
The vegetative stage lasts between 4-8 weeks which is again a varietal feature where weed forms leaves, stem, and secondary shoots. Weed propagated from seedling may set early flowering but, the average plants remain short stature resulting in low production. However, the plants raised from seed could produce bigger plants that mean bigger buds, more flowering, and bigger yields.
The flowering stages usually take between 6 weeks to 16 weeks depending on the genetic makeup of the plants. Auto-flowering strains could flower earlier compared to common cultivars especially Sativa and Indica. Every strain that comes between these two possesses less or similar features to these parent species. If the flowering stage would prolong in any strain that means more buds and the biggest harvest. Typically, the harvesting begins after 12 weeks in early maturing cultivars and 25 weeks or more in late-maturing cultivars. Typically, the number of flowers and bud formation decides the maturity of any Cannabis strain. Post-harvesting procedures could take another 3 to 4 weeks for adding aroma and taste to buds and leaves to your taste.
When it comes to harvesting buds and leaves from the weed plant, flush it at priority so that the nutrients and insecticides that exist on the upper surfaces of leaves get excreted through the process of evaporation. It will make it more flavorful, and a smoother taste could arise after the effects of chemicals dry out. It is advisable to apply neutral pH water 3-4 weeks before proceeding with harvesting. The color of ash could determine either it flushed out properly or not. While or grey ash is an indication of complete washing, whereas black ash indicates the presence of inert matters in the leaves.

It starts after you are done with the flushing and harvesting. You need to cut down the branches by having buds using a sharp cutter and hanging them upturned. You need to do wet trimming by pull off the fan leaves and trim the sugar leaves. If you delay trimming at the moment, go for it after the hanger drying. Both processes are equally good and could trigger aroma in the buds and young leaves.
You could use a string or clothing hanger to hang branches for drying. Always prefer a dark place where you could manage the humidity to less than 50%. It could be a grow room or a tent where you could install a fan for regular air circulation that keeps the environment cool. After you hang branches, including buds about ten days, try bending the stems. If the stem bend with the hand, it needs more drying process. If the stem cracks and explodes in the bending process, your branches are completely dry. If the stem loosely folds without making a cracking sound, it still needs some more days to finish. Once the drying is over, clip off the buds from the main stem, and place into a molded glass jar. Here is the stage that technically finishes your product for smoking weed. The longer you cure the buds and leaves, the better aroma and taste you would get.
To prevent mold and mildews, you could add 8 grams of Boveda- Two Way Humidity Pack (62%) for 1-2 ounces of dry weed. Once you get your molded glass jars full, storing them in a cool, dark, and dry place is suggested. Avoiding direct sunlight exposure could maintain the THC level high. Opening the lid of a jar for about half an hour daily could lead to excrete the extra moisture in the glass jar. It is a burping process and could continue for the first month of storage. Later it could reduce to 15 minutes on consecutive days. Up till now, we got a clear understanding that How to make weed from plants or How to prepare marijuana, the question lies what part of marijuana is used to smoke?

What part do you smoke? Is it the leaves or the flower?

Another opinion about how to prepare marijuana for smoking comes typically waiting for the initial process of drying and curing and making it enough to fit in a house grinder. This means that doesn’t get the shape of a boll, keeps itself a powdery mass, and burns well when ignited. Moreover, a wet product could discharge more smoke compared to weed that holds flowable texture. Some hobbyists could advise you to wait longer to develop the typical taste and aroma that marijuana possesses for smoking but, it could not happen with all strains as only a few hold the feature of a wine.
Keep it testing on regular intervals whether it still keeps that similar taste that was observed at the beginning. Another method is to check its aroma after opening the lid of a container. Some strains might go well for years when aged, while some others might lose their THC levels. If It just smokes improved and better every time you try it until ultimately it’s all away! That’s the material to handle like a superior wine. You could smoke every part of Cannabis, but the most enjoyable part is the flower from the female plant.

If you are a cannabis grower, you know the underlying goal is to grow the biggest and healthiest buds possible in your garden. You also know the feeling of disappointment when a strain you’re growing never fully develops the dense sticky buds you hope it would. While some strains are low-yielding, you should always be able to produce a high-quality bud if you’re taking the right steps.

If growing outdoors, make sure your pots or trenches are spaced far enough apart so that the sides of the plants can receive full sun. Growing on a south-facing slope will guarantee your plants are receiving as much sun as possible.

Pruning

Cannabis buds will form at most of the plant’s nodes. A node is where a leaf or branch grows off the stalk. The larger the plant grows, the more nodes will appear, which means your plant will have more locations where buds can grow.

Intuitively, you might think that more nodes means more and larger buds, but this is far from the truth. Nodes with buds that are lower down on the plant away from the canopy will try to develop in flowering but will never become fully developed because they do not receive adequate light.

Make sure your lights are at the right height so your plants are not suffering from heat stress. The plants should not feel hot, nor should your hand if you hold it at the top of the canopy. If you want to be precise, you can use a digital thermometer to figure out the precise temperature. By providing the right amount of light and keeping the lights the right distance away from your plants, you’ll keep your grow happy, resulting in the desired bigger buds.